Inventum IKI7840 Manuel D'utilisation page 32

Starting the bridge mode
1. Make sure that the appliance is on.
2. Touch the two left selection/timer buttons simultaneously to connect the cooking zones. The operation indicator
shows n for the front cooking zone and 0 for the rear cooking zone.
3. Use the up button and the down button to select the power level. The operation indicator shows the set power
level.
Stopping the bridge mode
1. Touch the two left selection/timer buttons simultaneously to disconnect the cooking zones. The operation
indicator shows H or 0.
LOCKING AND UNLOCKING THE APPLIANCE
When the appliance is locked, you cannot operate the touch buttons.
Locking the appliance
1. Make sure that the appliance is on.
2. Touch the down button and the front right selection/timer button simultaneously.
3. Touch the front right selection/timer button again. The operation indicator shows L when the appliance is
locked.
Unlocking the appliance
1. Make sure that the appliance is on.
2. Touch the down button and the front right selection/timer button simultaneously.
3. Touch the down button again. The operation indicator stops showing L when the appliance is unlocked.
USING THE COOKING TIMER
Note:
You can use the timer with different settings simultaneously for more than one cooking zone.
Note:
When the timer finishes, the timer display blinks 00 and you hear a sound signal. Touch any key to stop
the sound signal.
Note:
The cooking zone will automatically switch off when the timer is finished.
Starting the cooking timer
1. Select a cooking zone.
2. Use the up button or the down button to set the power level.
3. Touch the up button and the down button simultaneously to start the cooking timer. The timer display shows 00.
4. Use the up button to increase the time. The timer display shows the set time.
5. Use the down button to decrease the time. The timer display shows the set time.
6. When the cooking timer is set, the timer indicator stops blinking.
7. Repeat the procedure for another cooking zone.
Stopping the cooking timer
1. Select a cooking zone.
2. Touch the up button and the down button simultaneously. The timer display shows the remaining time.
3. Use the down button to stop the cooking timer. The timer display briefly shows 00 before it goes off.
4. Repeat this procedure for another cooking zone.
USING THE COOKING ALARM
Note:
The time of the cooking alarm can be set from 0 to 99 minutes.
32 •
EN