Page 1
GBR office: Ipswich FRA office: Saint Vigor d'Ymonville USA:cs.us@costway.com If you're having difficulty, our friendly AUS:cs.au@costway.com customer team is always here to help. GBR:cs.uk@costway.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. FRA:cs.f r @costway.com...
Page 2
Return / Damage Claim Instructions Before You Start DO NOT discard the box / original packaging. Please read all instructions carefully. In case a return is required, the item must be returned in original box. Without this Retain instructions for future reference. your return will not be accepted.
Page 3
DETAIL VIEW / VUE DÉTAILLÉE EN: To remove Upper Bunk Bed, take connecting bar (9) out of the Lower Bunk Bed. FR: Pour retirer le lit superposé supérieur, retirez la barre de connexion (9) du lit superposé inférieur. Upper Bunk Bed /Lit superposé...
Page 4
PARTS LIST / LISTE DES PIÈCES HW65358-12 EN: Lower leg Left Front /Right Back EN: Lower leg Left Back/Right Front EN: Upper leg Left Front /Right Back EN: Remove FR: Pied inférieur avant FR: Pied inférieur arrière FR: Pied supérieur avant Hex-Head bolts (5) gauche/arrière droit...
Page 5
HARDWARE LIST / LISTE DES ACCESSOIRES Ø10*40mm (Ø15)1/4"*100mm (Ø15)1/4"*80mm EN: Wood dowel EN: Hex-Head bolts EN: Hex-Head bolts FR: Cheville en bois FR: Boulons à tête hexagonale FR: Boulons à tête hexagonale (Ø12)1/4"*60mm (Ø12)1/4"*40mm (Ø12)1/4"*30mm EN: Hex-Head bolts EN: Hex-Head bolts EN: Hex-Head bolts FR: Boulons à...
Page 6
EN: Note: Do not lock the screws of the bed slats to the outermost edge of the bed slats, you need to leave a certain space at the edges, otherwise it will cause the board to break. Do not lock the bed slats on the edge of the wood, please hold firmly before screwing, hold it in place with one hand, then lock the screw.
Page 7
69mm(2.7") EN: Note: Do not lock the screws of the bed slats to the outermost edge of the bed slats, you need to leave a certain space at the edges, otherwise it will cause the board to break. Do not lock the bed slats on the edge of the wood, please hold firmly before screwing, hold it in place with one hand, then lock the screw.