Senix LPPX5-L Manuel De L'opérateur page 7

Assembly the handle into the grass catcher. Aligh the
tabs on the handle with the tabs on the grass catcher.
Insert the handle until the tabs lock in place.
Only adjust the cutting height when the blade is
stopped.
Apply outward pressure to disengage lever from rack.
Move lever forward or back to adjust height.
The height (the blade to the ground) can be adjusted
from 1.15 in. to 3.1/10 in. (30mm to 80mm)
1. Open the battery door.
2. Insert the battery pack into battery holder.
3. Make sure the latch on bottom of battery pack snaps
in place and that battery pack is fully seated.
4. Close the battery door.
1. Lift and hold up the battery door.
2. Push and hold the battery latch button at the bottom
of the battery pack.
3. Remove battery pack.
WWW.SENIXTOOLS.COM
L
Battery
Release
Latch
a le
a
7