Senix LPPX5-L Manuel De L'opérateur page 14

Rotating blades can cause serious injury. Remove
safety key when unattended, cleaning, servicing,
transporting, lifting, or stowing the mower.
Motor does not run
Motor power drops
Grass catcher is not filled
Machine leaves ragged finish
Motor does not run
Machine leaves ragged finish
14
Turn power on
Start on short grass or on an area which has already been mown
Clean discharge channel/housing –the mowing blade must rotate freely
Correct the cutting height
Correct the cutting height
Clean discharge channel/housing
Have mowing blade resharpened /replaced customer Service center
Correct the cutting height
Allow the lawn to dry
Have mowing blade resharpened /replaced customer Service centrer
Clean the grille on the grass catcher
Clean the discharge channel /housing
Height of cut too low, increase height of cut
Cutting Blade Blunt, have the blade resharpened or replaced
Power OFF
Grass too long
Blade blocked
Height of cut too low
Cutting Blade Blunt
Turn power ON
Increase the height of cut and move machine to shorter
grass to start
Clean discharge channel/housing
Increase height of cut
Have the blade resharpened or replaced
WWW.SENIXTOOLS.COM