Panasonic DOUBLE FEATURE PV-D4745S-K Mode D'emploi page 32

All manuals and user guides at all-guides.com
Tape Operation (continued)
Tape Select
Select your tape length so the tape position and amount
of tape remaining are properly displayed.
(See "Tape Position and Tape Status Feature" section
below.)
1 Press ACTION*
to display MENU.
Press
2
"SET UP VCR," and
press SET.
3
Press
SELECT," and press SET
to set
"T-120," "T-160" or "T-180."
T-120
• Select "T-120" for tapes 120 minutes or less,
"T-160" if 140 or 160 minutes, and "T-180"
if 180 minutes.
4
Press ACTION
to return to normal screen.
Tape Position and Tape Status Feature
To find out the present tape position and amount of tape
remaining.
Tape position is displayed incorrectly in the following cases:
• If VHS-C type cassettes, tapes under 30 minutes, tapes
over 180 minutes, or incompatible tapes are used.
• If the correct tape length is not selected.
(See "Tape Select" section above.)
1
Press TAPE POSITION
to detect current tape position.
• "DETECTING TAPE POSITION"
DETECTING TAPE POSITION
only appears the first time a
cassette is inserted and it takes
several seconds for correct
indication to appear.
• The present tape position
indication and amount of tape
remaining (according to tape
speed) are displayed.
Tape remaining time display may
not be precise.
2
Press TAPE POSITION
(or wait 5 seconds) to return to normal screen.
32
D4745S-K(E) P26-35 (050120).p65
*Important: If a remote control button does
to select
to select "TAPE
T-160 T-180
32
not work when pressed, press
the VCR button on the remote
and try the button again.
ACTION
SELECT
SET
TAPE
POSITION
2005/01/20, 14:02