Panasonic DOUBLE FEATURE PV-D4745S-K Mode D'emploi page 16

All manuals and user guides at all-guides.com
Initial Setup for Basic Connections (Ready to Play)
Before doing Initial Setup
1
Turn TV on.
2
See connections
<RF Coaxial Cable Connection>
Set TV to channel 3.
<AV Cable Connection>
Set TV to VIDEO.
3 [DECK ➛ ➛ ➛ ➛ ➛ TV]
• Go to "Initial Setup (Ready to Play)." (See below.)
[Cable Box ➛ ➛ ➛ ➛ ➛ DECK ➛ ➛ ➛ ➛ ➛ TV], [DSS ➛ ➛ ➛ ➛ ➛ DECK ➛ ➛ ➛ ➛ ➛ TV]
• Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel
in your time zone.
• If you use a DSS Receiver, it must be turned off.
Initial Setup (Ready to Play)
1
Press VCR on remote for VCR mode.
2
Plug DECK Power Cord into AC wall outlet. DECK comes on and SELECT
LANGUAGE screen appears. When one of "1", "2", "3" keys is pressed, auto
channel and clock set starts.
• If screen below does not appear, check DECK - TV connection and, if TV is tuned to
channel 3, try switching it to channel 4.
• To change VCR's output channel, please refer to "VCR's Output Channel" on page 19.
• If wrong language is set, do "Reset All Memory Functions" (p. 9).
Plug VCR Power plug into an AC wall outlet.
16
D4745S-K(E) P1-25 (050120).p65
RF Coaxial Cable Connection and
Select language
Press 1 : English
Press 2 : French
Press 3 : Spanish
Notes
• Function buttons are void during Initial Setup.
• To eject a tape during Auto Set, press EJECT on remote
or STOP/EJECT twice on DECK.
Then make settings manually. (See p. 18.)
• If Auto Clock Set takes more than 30 minutes,
press STOP and perform settings manually. (See p. 18.)
16
AV Cable Connection on page 12.
Continued on next page...
2005/01/20, 14:02