Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Work Light:
•
To turn ON: press the
•
To dim, press and hold until desired brightness is reached. Light will flash
when at lowest setting.
•
To increase brightness, press and hold until desired brightness is reached.
•
To turn OFF: press the power button.
Hazard Light
•
To turn ON: press the
•
1x for solid-on
•
2x for flash
•
3x for triple pulse
•
To turn OFF: press the power button.
The battery status indicators illuminate when the light is in use.
CHARGING THE INTERNAL BATTERY:
Please charge before initial use. In order to keep the charge, be sure to fully
recharge the unit every 6-12 months, even if the unit has not been used.
1.
Locate the attached USB cord on the side and plug into a USB power port
such as a USB wall charger, USB car charger or power bank.
2. The charge indicator LEDs will illuminate to show the level of charge
(25%-100%). While recharging, the next LED will flash, followed by the
next until fully charged. It is fully charged when all 4 LEDs illuminate solid.
3. Return the USB cord into its storage location.
3
button on the left.
button on the right.
Publicité
Table des Matières
