Publicité
4.0 Charging Instructions
Plug the charging connector into the vehicle charging socket and confirm that it is connected
properly. If the blue LED light is always on, the charging station is in connection status.
After a charging session is initiated properly, the blue LED light shall be in a pulsing / breathing
state, indicating that the charging process has started.
If smart charging is enabled, your vehicle might not start charging immediately even if the LED is
in pulsing / breathing state. We take your electricity tariff, solar PV production and other factors
into account to provide you the most optimized charging experience. There is nothing left for you
to do, your vehicle will be ready according to the "ready by" time you have set up.
To end charging, press the Unlock button and unplug the charging connector. Safely stow away
the charging cable by wrapping it neatly in the cable winding through, and make sure the
connector is properly stowed.
© 2023 Maxeon Solar Technologies, Ltd. All rights reserved. | 549550 Revision A - October 2023
Specifications included in this document are subject to change without notice
7
Publicité
