Bessey EBH Serie Mode D'emploi page 18

9. Miscellaneous
9�1 Warranty conditions
1. A defect or fault must be reported immediately in order to avoid possible consequential
damage. Warranty claims will be voided if the defect or fault is not reported immediately.
2. The warranty does not cover defects resulting from failure to observe the installation,
safety and operating instructions given in the user manual.
3. The warranty does not apply to damage resulting from:
• Contact with aggressive substances,
• Exposure to water,
• Abnormal ambient or environmental conditions,
• Inappropriate operating conditions or conditions of use.
4. Unauthorised modifications or modifications by third parties will void the warranty. The
replacement of parts with non-OEM parts will also void the warranty.
5. The product must be sent to the manufacturer's Service department for repair.
6. A repair by Bessey within the warranty period will not result in a commencement of a
new warranty period nor in a prolongation of the original warranty period.
7. Other claims for damages, such as damage occurring outside the product, will not
be accepted.
8. Wear and tear parts are not covered by the warranty.
9. For further provisions, refer to the General Conditions of Sale and Delivery of Bessey.
9�2 Disclaimer
The manufacturer and/or supplier cannot be held liable for any damage to workpieces or
consequential damage resulting from incorrect use of the device or damage to workpieces
and any consequential damage resulting from a defect in the device.
9�3 Waste disposal
Power tools, accessories and packaging must be reused at the end of their life cycle in an
environmentally sound manner. Do not dispose of used power tools as
residual waste, but bring them to a recycling company that complies with the
applicable environmental requirements.
18 © Bessey Tools