DeLOCK 91740 Mode D'emploi page 4

English
Note: Please note that only storage media in FAT32 / exFAT format
can be recognized.
Other devices
1.
Connect the card reader to the USB-C™ port of your device.
2.
You can now insert the memory card into the suitable slot, by
pushing it slightly. The blue LED lights up when the memory
card is recognized.
3.
In order to remove the memory card, just push it slightly and
take it out from the slot.
Note: Data cannot be exchanged directly between adjacent SD and
Micro SD slot.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage:
www.delock.com
Final clause
Information and data contained in this manual are subject to change
without notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted
for any purpose, regardless in which way or by any means,
electronically or mechanically, without explicit written approval of
Delock.
Edition: 10/2023
-4-