Orion XTR402 Manuel Du Propriétaire page 4

FINDING SPEAKER MOUNTING LOCATIONS
Choosing the correct speaker locations will have the greatest effect on the sound
quality of the system. Different considerations are needed when choosing the
locations that best suit your needs. The locations must be large enough for the
speakers to fit. Care is needed to ensure that the location you have chosen will not
affect any of the mechanical or electrical operations of the vehicle.
Determining the best location for the speakers will depend on your cosmetic needs
and your vehicle's interior. If minimal intrusion in your vehicle is desired, factory
speaker locations may be the ticket for you. Placing the speaker in the factory location
can often give very desirable results.
DOOR MOUNTING
When checking for possible speaker locations in the doors, check the operation of the
window and all of the doors assemblies. There is also a stabilizer stop bar in between
the door and the door jamb. This bar prevents the door from opening too far. Pay
particular attention to this so you do not damage the speaker when you close the
door.
Figure 1
Figura 1
Abbildung 1
REAR DECK MOUNTING
In rear deck installations, check the operation of the trunk suspension springs or
tension bars. These tension bars move in the opening and closing of the trunk. You
cannot be too cautious during this part of the installation, In addition, do not locate
the speakers too close to the back of the rear deck. Mounting the far screws will only
be possible with the removal of the rear window.
© 2008 directed electronics—all rights reserved
Inside
of Door
Speaker
cut out
Speaker installed
with no gaps
or air leaks
Dampening on
top of outer
door skin
Dampening Mat
Coaxial
Driver
Grille
Door
Panel
Screws
3