Publicité
Les langues disponibles
Les langues disponibles
Stopping the alarm
To stop the alarm, press either the large button on the top of the alarm clock
or the small button "ALARM" on the bottom.
Important!
If the snooze mode is activated in the app, the alarm is not stopped,
but only interrupted for a short time (5 minutes by default) and then
restarted!
Please refer to the next section.
The alarm can also be closed in the app itself (move the slide switch to the right of each alarm to
the "off" position).
Snooze mode
If the alarm clock sounds the alarm, press briefly on the top of the alarm clock.
The alarm is interrupted for 5 minutes and then restarted. This process is gener-
ally possible 3x.
These basic settings for snooze mode can be changed in the app (number of
snooze phases or the pause and alarm duration).
Set-up mode
Before settings of the alarm clock can be changed, one of the alarm clocks displayed
in the main view must be paired with the app.
To do this, touch one of the displayed alarm clocks (one is included in the delivery;
however, the app can be used with up to 5 alarm clocks); a pop-up with the search for
the selected alarm clock will appear in the app.
Once the pairing and synchronisation for time and settings are completed, the settings
can be made as described below.
Touch the small gear icon at the top right of the main menu of the app to go to the
setting mode for the alarm clock.
In set-up mode, you can turn snooze on/off; the number of repetitions for the snooze
function (default = 3) and the duration (default = 5 minutes). Moreover, it is possible to
adjust the duration of the alarm.
By default, the automatic summer/winter time change-over is also activated; this can be turned
off in the set-up mode.
In the bottom two rows of the set-up mode, the current time zone (which is currently used by iOS) is
displayed and the date on which the changeover between summer/winter time is made.
Timer function
Touch the button in the app for the timer (bottom row with the time display of the timer, 0:00:00 by
default).
You can then set the timer time in hours, minutes and seconds, and select the alarm sound and
volume.
After setting the timer, return to the main screen, so that the timer can be started and stopped or
paused with the start button to the left of the timer time.
If the timer is stopped prematurely, then a button appears to the right of the time to
reset the timer (to the timer time set by you).
Clear alarm clock from the app
If you want to clear the alarm clock from the app (e.g. if you use multiple alarm clocks and you want
to remove one of them), then proceed as follows:
• After starting the app, the main view is displayed with the selection of the available alarm clock.
• Touch the small gear icon at the top right; then the app displays the known alarm
clock with its serial number (up to 5 of them can be operated with the app).
• Touch the top right button to edit the displayed list.
• A red "minus" symbol appears to the left of the alarm clocks. Should one of the alarm clocks be
deleted, then touch this symbol.
As a security prompt, a button is now displayed to the right of the alarm clock to clear the alarm
clock. If this button is touched, the alarm clock is removed from the app.
If you want to reconnect the alarm clock to the app, then proceed as described in the
"Pair alarm clock with smartphone/tablet " chapter.
Reset
To reset the alarm, the alarm clock located on the "RESET" bottom must be pressed briefly. All data
(e.g. time/date and alarm times) are deleted from the alarm clock. The LED flashes 2x in purple,
then the LED flashes 1x every 6 seconds in red.
If you want to reconnect the alarm clock to the app, then you must hold the "PAIR" button for 5
seconds.
A display may appear in the app to restore or delete the existing data of the alarm alarm clock.
Then, select the required function.
All manuals and user guides at all-guides.com
Maintenance and Cleaning
• Apart from the occasional battery change, the product is maintenance-free for you.
• The outside of the product should only be cleaned with a clean, soft, dry cloth.
Disposal
a) General
b) Batteries and rechargeable batteries
As the end user, you are required by law (Battery Ordinance) to return all used batteries/recharge-
able batteries; disposal of them in the household waste is prohibited.
Used batteries, rechargeable batteries as well as coin cells can be returned to collection points
in your municipality, our stores or wherever batteries/rechargeable batteries/coin cells are sold.
You thereby fulfil your statutory obligations and contribute to the protection of the environment.
Declaration of Conformity (DOC)
We, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this prod-
uct conforms to the fundamental requirements and the other relevant regulations of the directive
1999/5/EC.
Technical Information
Power supply ........................................................ 2 batteries of the type AA/Mignon
Battery lifespan .................................................... approx. 1 year
Bluetooth
Integrated clock ................................................... yes (is automatically synced via app and the time of
Ambient conditions .............................................. Temperature 0 °C to +40 °C, air humidity 20% to 95%
Dimensions............................................................ 60 x 60 x 60 mm (W x H x D)
Weight .................................................................... 77 g (without batteries)
Do not use aggressive cleaning agents or chemical solutions for this could damage the
housing (discolouring) or impair the operation.
Please dispose of the unserviceable product according to the relevant statutory re-
quirements.
Remove any inserted battery/rechargeable battery and dispose of it separately from
the product.
Contaminated batteries/rechargeable batteries are labelled with this symbol to indi-
cate that disposal in the domestic waste is forbidden. The designations for the heavy
metals involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead.
The declaration of conformity for this product is available at:
www.conrad.com
version ............................................... 4.0
®
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE.
the smartphone/tablet)
relative, not condensing
Publicité
