Publicité
Les langues disponibles
Les langues disponibles
Beleuchtung C408, P807, P1607
Lighting C408, P807, P1607
Eclairage C408, P807, P1607
Illuminazione C408, P807, P1607
2.
Standard equipment
The lighting consists of the lighting unit in two sections, the screw plugs, the
connection cable and a set of lamps. The Glatz electric kit is a prerequisite for the use
of the lightings C408, P807 or P1607.
3.
Operation
The lighting unit is switched on and off by means of the switch installed on the spot.
Depending on the lamp type it may last just a few moments before the full luminous
power is available.
4.
Installation
The lightings 408, P807 and P1607 consist of the lighting unit with a connection cable
and a set of lamps. The Glatz electric kit is a prerequisite for the operation of the
lighting.
4.1.
Installation of the lighting unit on Castello (C408)
Fasten the
protecting tubes
Insert the
lamps
02.2007-DEFI
1. Fasten the protecting tubes for
the cables to the upper pole end
with adhesive tape.
2. Insert the lamps of the standard
equipment into the holders.
9
Publicité
