Glatz C408 Mode D'emploi page 10

Align the
grooves
Openings
Upper screw plugs
Gap
10
Beleuchtung C408, P807, P1607
Illuminazione C408, P807, P1607
No gap
Lighting C408, P807, P1607
Eclairage C408, P807, P1607
3. Place half the lighting unit on
the pole. Make sure that the
groove in the lighting unit is in
line with the narrow grooves on
the crown and the slide.
4. Place the other lighting unit
half on the pole. Make sure
that the cables and the rope
protection tubes are led
through the openings in an
accurate way.
5. Screw the upper screw plugs
in.
6. Push the lighting unit completely
downwards in order to make
sure that there is no gap left bet-
ween the black guides and the
lighting unit cover. Two pins of
the black guides are now au-
tomatically blocked up in the
hollows of the lighting unit cover.
02.2007-DEFI