1byone Nostalgic Wooden Turntable Manuel D'instructions page 4

1. Dust Cover
EN
2. 45 RMP Adapter
DE
3. Turntable
4. Repeat Button
FR
5. PROG/CLK Set Button
ES
6. Record Button
7. Function Button
IT
8. Power Button
9. LCD Display
10. Volume Control Dial
11. USB Port
12. Dial Scale
13. CD Door
14. FM Wire Antenna
15. AUX Out (RCA Jack)
16. DC Input Jack
17. Head Shell
18. Tone Arm
GETTING STARTED
Connecting The AC Adapter
1. Plug the AC adapter into a normal power outlet.
2. Insert the DC plug of the AC adapter cord into the DC INPUT Jack at the back of
the turntable.
REAR VIEW
NOTE:
• Only use the supplied power adapter.
• Please ensure that your outlet voltage is compatible before connecting the turntable
to power.
All manuals and user guides at all-guides.com
19. Screw Lock
20. Hold Down Clip
21. Tone Arm Control Lever
22. Speed Selector
23. Auto Stop Control
24. Tone Arm Rest
25. Cassette Slot
26. Eject / Button
27. Speaker
28. +10 Track Button
29. Play / Pair Button
30. Stop Button
31. Skip / Button
32. Tuning Control Dial
33. Phones Jack
34. AUX Jack
35. CD Door Open Button
To Wall Outlet
4
Switching On The Turntable For The First Time
Plug into AC power by following the instructions on the previous "Connecting The
AC adapter" section. Press the button to turn on the turntable, and press it again
to turn off the turntable.
Switching Between Different Sources
After turning on the turntable, press the Function button to switch between CD/
USB/BLUETOOTH/PHONO/FM Radio/AM Radio/AUX/CASSETTE TAPE sound sources.
Adjusting Sound Volume Level
After turning on the turntable, turn the Volume control dial to adjust the level of
sound volume.
Power Management Function
The turntable will automatically go into standby mode after 15 minutes of inactivity.
To resume operation, simply press the
Display Dimmer
In standby mode, press and hold the
brightness will dim. To resume operation, simply press and hold the
to 5 seconds again.
SETTING THE CLOCK
1. The clock can be set when the turntable is in Standby mode and the screen is
displaying the time.
2. Press and hold the CLK SET button until the display digits flash on the display.
3. Press the / buttons to select a 12 or 24-hour format for the clock.
4. Press the CLK SET button to confirm the hour format and the hour digits will flash
on the display.
5. Press the / buttons to increase or decrease the hour time.
6. Press the CLK SET button to confirm the hour setting and the minute digits will
flash on the display.
7. Press the / buttons to increase or decrease the minute time.
8. Finally, press the CLK SET button to confirm and set the time.
NOTE:
• When the turntable is disconnected from power, the clock settings will be erased.
Please set the clock again when the turntable is plugged back into power.
• When the hour format is set on 12H, carefully check that the AM/PM indicator is correct.
button to wake the turntable.
button for 3 to 5 seconds, the display
button for 3
5
EN
DE
FR
ES
IT