Herschel Krystal-600-B Instructions D'installation page 3

Steps:
6. Use 4 x small self-tapping screws to fix the heater assembly onto the ceiling bracket.
1. Attach the heater
secure with 4 x small self-tapping screws.
2. Attach the heater surround to the heater using 4 x
small self-tapping screws as shown.
3. Mark the position of the 4 drill holes in the ceiling using the
Ceiling brackets as a template.
4. Drill the 4 holes and insert the rawlplugs. Screw 4 x PWA
Tapping Screws through the ceiling bracket and into the 4
rawlplugs to secure the bracket to the ceiling.
5. Slide the assembled heater and brackets onto the ceiling
bracket until it settles into the two recesses in the middle of the
bracket (see diagram). This will ensure the heater cannot then
slide on the bracket.
brackets to the
ENGLISH
surround and