Publicité
Les langues disponibles
Les langues disponibles
010-880_6SPRACHIG_DIN_A5.QXP_Layout 1 05.03.13 13:38 Seite 6
Use each adaptor depending on probe type and the backwater system (see 1-3)
General: The adaptors are used to fasten the new Probes without mounting brackets.
①
Installation note adaptor:
• The raised edge on the adaptors are to assure the adaptor ist installed properly
and should always be pointing up.
All manuals and user guides at all-guides.com
②
③
① For models January 2011 and newer
Adaptor for all pump optical sensors
For models up to December 2010
Adaptor for all Staufix FKA and Pumpfix F
optical sensors for DN 100 (OD 110 mm) models
② For models January 2011and newer
Adaptor for all motor optical sensors
③ For models up to December 2010
Adaptor for all Staufix FKA and Pumpfix F optical sen-
sors for DN 125 (OD 125 mm) and DN 150 (OD 160
mm) models.
Must be used in combination with the red adaptor
(adaptor ① is inserted into the top of adaptor ③).
6
Publicité
