iHealth PO3M Guide De Démarrage Rapide

EN
®
Wireless Pulse Oximeter
QUICK START GUIDE
SET-UP INSTRUCTIONS
CHARGE THE BATTERY BEFORE FIRST USE
Plug the iHealth Wireless Pulse Oximeter into a USB port for three hours or until the
battery indicator turns o .
DOWNLOAD APP
Download the free "iHealth MyVitals" app from the App store
(compatible iOS device ) or Google play store (compatible Android
device ). Follow the on-screen instruction to register and set up your
iHealth useraccount. (Your compatible iOS device should be version
5.0 or later And Android device should be version 4.3 or later )
ACESS IHEALTH CLOUD
Upon setting up your app user account, you will also have access to a free, secure
iHealth Cloud account by using your app login name and password. Go to
www.ihealthlabs.com, then click on " Sign In".
All manuals and user guides at all-guides.com
iHealth MyVitals
TURN BLUETOOTH "ON"
Your iHealth Wireless Pulse Oximeter uses Bluetooth 4.0 Low Energy(BLE) technology.
Enable the Bluetooth on your device (If iOS device :Settings->General->Bluetooth->On
If Android device:Settings->Bluetooth->On),launch the app to initiate the connection.
The Bluetooth icon will light up and stop ashing when a successful connection is
established. The date and time of the Pulse Oximeter will be synced with your iOS
device upon rst successful connection.
TESTING INSTRUCTIONS
1. Open the clamp of the Pulse Oximeter, then place your middle, ring or index nger
of your left hand into the rubber opening of the oximeter with nail side down, as
pictured.
2. On the front panel, press the "Start" button
once to turn the oximeter on.
3. Keep your hand still for the reading.
4. After a few seconds, your SpO2 reading will
appear on the oximeter display screen and the
app if the app is turned on.
5. If the signal strength is too low, switch to
another finger and perform the test again.
6. Remove the oximeter from the nger. The oximeter will automatically turn o after
8 seconds.