Publicité
Les langues disponibles
Les langues disponibles
CP 0044
Operation
WARNING
Involuntary start
Involuntary start of the machine may cause injury.
Keep your hands away from the start and stop
►
device until you are ready to start the machine.
►
Learn how the machine is switched off in the event
of an emergency.
Stop the machine immediately in all cases of
►
power supply interruption.
Start and stop
Start the concrete saw by pressing the start and stop
device release with thumb to unlock the start and
stop device.
Keep the start and stop device release pressed in and
squeeze the start and stop device using fingers, to
start the concrete saw.
Stop the concrete saw by releasing the start and stop
device. The start and stop device returns
automatically to the stop position.
9800 0543 90b | Original instructions
All manuals and user guides at all-guides.com
Safety and operating instructions
Operating
WARNING
Kickback hazard
Kickback of the machine and cutting blade can
happen very suddenly, when using the upper
quadrant of the cutting blade. This can result in
serious injuries or death.
Never use the upper quadrant of the cutting blade
►
when operating the machine.
Operation
Stand in a stable position and hold the concrete
♦
saw firmly with both hands.
Stand in such a way that the body is clear of the
♦
cutting attachment. Avoid standing in direct line
with the blade.
♦
Start cutting with the machine running at
maximum speed.
♦
ON
A
A
OFF
Turn on water valve (A) to reduce dirt, dust, and
slurry; and to increase life length of cutting blades.
In order to get a proper flow, adjust incoming
water flow by turning water valve (A) clockwise
to reduce, counter clockwise to increase.
17
Publicité
