All manuals and user guides at all-guides.com
Trouble Shooting the Steamer
PROBLEM
Steamer fails to heat
No steam
Water drips from nozzle
Nozzle gurgles
Steam is intermittent
CAUSE
Steamer not plugged in
ON/OFF switch not in
"ON" position
Auto shut off engaged
Water level is low
Condensation in hose
Condensation in hose
Mineral build-up
10
SOLUTION
Plug in to electrical outlet
Push switch to "ON"
position. Switch will
illuminate.
Check water container to
ensure it is not empty. If
full, press the reset button
on side of unit. If empty,
refill and push reset to
begin.
Turn ON/OFF switch OFF
and refill water container
Hold the hose vertically
and allow water to drain
back into tank
Hold the hose vertically
and allow water to drain
back into tank
Follow the procedure for
removing mineral build-up