Publicité
7
NOTE: The SW-MOTECH anti-theft protection devices are available separately;
mount the anti-theft protection devices on both sides at the indicated position. a
Connect side carriers (11) and (12) to fastening clips (1) and (6) and to the
crossbar (14) using the quick-release fasteners (13).
When all components are tension-free, tighten screws (3) and (7) according to
the manufacturer's instructions.
Tighten the screws (16) as specified in the mounting instructions.
The content translation is automated.
© SW-MOTECH GmbH & Co. KG
MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS!
10
Errors and omissions excepted
Subject to technical and design changes.
Publicité
