Publicité
Les langues disponibles
Les langues disponibles
1. Always unplug the appliance from electrical outlet before cleaning.
2. Never immerse the base of this appliance in water or other liquid.
3. The blade, slicing guard and food carriage can all be removed and hand washed
in warm soapy water. Be careful when cleaning the blade, as it is extremely
sharp. Do not leave blade under water; trying to handle sharp objects in water
can be hazardous.
4. Set thickness control to "P". This will keep the blade edge covered by support plate.
5 . For ease of cleaning, the food carriage can be tilted up or completely removed.
6.
and turn blade locking screw. Unlock blade by turning screw clockwise. Carefully
remove blade and hold by using the blade locking screw.
7. Clean outer surfaces with a damp cloth. Mild detergent or plain water can be
used to dampen cloth. Never immerse base in water or any other liquid. Do
not use steel wool, abrasive cleaners or sharp utensils to clean any part of this
appliance.
8. After cleaning and drying, install blade to base in reverse order of Step 6.
Carefully place blade on mating hub of motor. Align the locking screw tabs with
the mating slots in the hub of motor and press in until seated. Rotate locking
screw counter-clockwise until seated to lock blade in place.
CARRIAGE REMOVAL
CARRIAGE TILT
3
BLADE REMOVAL
Publicité
