Elektrotechnik Schabus GX-A1 Notice D'utilisation page 13

6. TECHNICAL SPECIFICATIONS
Operating voltage:
Power consumption:
Sensor voltage:
Relay contact:
Acoustic pressure sounder:
Operating temperature:
Protection type:
GENERAL
Elektrotechnik Schabus GmbH & Co. KG is not liable for damages and/or losses of any kind
such as individual damages or consequential damages brought about by the gas detector not
issuing an alarm despite the presence of an elevated gas concentration.
To ensure that the sensor is always in a proper functioning state, you should replace it after
5 years for safety's sake.
CLEANING AND CARE
Avoid the effects of moisture (spray or rain water), dust as well as direct insolation on the
device. Clean the device exclusively with a dry linen cloth; in case of heavy dirt accumulation,
it may be slightly moistened. Do not use any detergents containing solvents.
DECLARATION OF CONFORMITY
The declaration of conformity can be obtained from our website:
www.shop.elektrotechnik-schabus.de
210 - 250 V AC / 50-60 Hz
4 W
5 V
5 A (potential-free two-way contact)
90 dB @10 cm
-15°C / +40°C
IP 20
13