Télécharger Imprimer la page

Lorex Baby SWEET PEEK Mode D'emploi page 21

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
Troubleshooting
Problem
No video displayed on
the monitor
Monitor screen keeps
turning off
The camera is not
detected; "Out of Range"
is shown on the monitor
Feedback / squealing
noise coming from the
monitor
Feedback / squealing
noise coming from the
monitor
Need Help?
Product Support is available 24/7 including product
information, user guides, quick start guides, and FAQ's
at www.lorexbaby.com/support
Solution
• Press and hold the
button
to power on the monitor.
• Monitor is out of batteries. Plug
in the monitor power adapter.
• Video Off or VOX mode is on.
Press any button to turn the
screen back on.
• VOX mode is on. See "Enabling
VOX Mode (Voice Trigger)"
on page 14 for details on
disabling VOX mode.
• The monitor battery is low. Plug
in the monitor power adapter
• Wrong channel selected. Press
repeatedly to select the
channel.
• Make sure the camera is
powered on.
• Camera may be out of batteries.
Replace the batteries.
• The camera and monitor may
be out of range. Extend the
antennas on the monitor and
camera or move the monitor
and camera closer together.
• You may need to pair the
camera and the monitor
again. See "Pairing Additional
Cameras" on page 16 for
details.
• Your camera and monitor may
be too close to each other.
Move them further apart.
• Press
to lower the monitor
volume.
• Your camera and monitor may
be too close to each other.
Move them further apart.
• For optimal performance, avoid
placing the monitor and camera
near televisions, computers,
cordless/mobile phones, or
other electrical equipment.
• Lower the monitor volume.
19

Publicité

loading