Lorex Baby SWEET PEEK Mode D'emploi page 15

All manuals and user guides at all-guides.com
Temperature Alerts
The temperature alert feature allows you to ensure the
baby's room is at a comfortable, safe temperature.
The monitor beeps if the temperature gets too hot or
cold. Temperature sensor is accurate within 3°F/1°C.
You can control the high and low temperatures that
trigger alerts or disable temperature alerts.
To setup temperature alerts:
1
Lo 66° F
Press
2
temperature.
If the temperature at the selected camera
goes below this temperature, the monitor
will beep and the temperature reading on
the monitor will say "Lo".
If you select a temperature below 62°F /
17°C, the low temperature alert will be
turned OFF.
3
Press until
Press
4
temperature.
If the temperature at the selected camera
goes above this temperature, the monitor
will beep and the temperature reading on
the monitor will say "Hi".
If you select a temperature above 86°F /
30°C, the high temperature alert will be
turned OFF.
5
Press to exit menu.
Lo is shown.
Press until
to adjust the low
Hi is shown.
to adjust the high
13