M7 QE-131 Mode D'emploi page 4

Maintenance:
1. Before connecting the air hose to this tool or after
operating, apply 4 or 5 drops of pneumatic oil into the
air inlet and run it for several seconds, referring this
operation to the attached picture.
2. Maintain this tool regularly by performing the same
oiling application every 3 to 4 hours of operation.
3. Do not lubricate tools with flammable or volatile liquids.
Use only the lubricant recommended by Mighty-
Seven or authorized dealers. Any other lubricant will
lead to reduce performance of the tool and permanent
damage. Whenever any unauthorized lubricant is used
by accident, flush it immediately with recommended
pneumatic oil.
4. Follow all the recycling laws of waste disposal once
this tool is no longer usable.
4
All manuals and user guides at all-guides.com
Pneumatic oil
Regular maintenance
Air inlet