Publicité
All manuals and user guides at all-guides.com
How the Unit Operates
Indoor air circulates from the rear of the heater, passes through a highly effi cient air
fi lter, and enters a chamber with infrared quartz bulbs. Finally, the heater discharges
heated air from the diathermanous copper plate constructed on the front of the
unit. The heater ideally heats a room of 500 to 700 square feet. It can be used to
heat up a single room size up to 1000 square feet depending on the ambient tem-
perature. It does all this with a noise level below 46db. The heater is designed not
for use as the primary/sole heating system, but rather as
Components and Functions
A. The heater is constructed with infrared quartz bulbs. Each
infrared quartz bulb rates at 375W. These bulbs produce therapeutic infrared
rays that warm the air which passes through the inner chamber. The infrared
quartz bulbs are constructed with a stainless steel thermal conducting housing.
The incorporated twisted style increases the effi ciency of the unit.
B. An AC cross fl ow fan pushes air over these infrared quartz bulbs. Cross fl ow fans
create a wide fl ow of air using a cylindrical-shaped impeller. Air is drawn inside
the heater, fl ows along the circumference of the chamber and over the infrared
quartz bulbs, and is blown out laterally creating a uniform fl ow of warm air.
C. The heater has a delay start function which controls the AC cross fl ow fan. The
purpose of the delay start function is to allow the infrared quartz bulbs to heat
up before the fan begins to circulate the air fl ow. In addition, the AC cross fl ow
fan will continue to circulate the airfl ow after the power is turned off to circulate
the warm air from the heater cooling the unit down.
D. The air fl ow exits through the front of the heater. It travels from the
diathermanous copper plate. The diathermanous copper plate is
constructed from red copper making it advantageous for effi cient thermal
conductivity. It is a resourceful material in refl ecting the infrared rays.
E. The LED digital display is a convenient, stylish, and modern way to display the
temperature and timer. This attractive addition compliments the heater, in that, it
simplifi es and makes controlling the unit easy. Operating the heater is logical and
can be done on the unit itself or by remote
a supplemental source.
4
Publicité
