Publicité
REPLACING THE STYLUS
1. lift the tone arm off the tone arm rest.
2. At the front end of the tone arm, place the tip of your fingernail between the red stylus holder and
the black cartridge housing as shown, press down on the red stylus holder until it separates from the
cartridge housing.
3. completely remove the red stylus holder with worn stylus and discard it.
4. Place the new red stylus holder with stylus under the cartridge housing. First, press upward on the back
side of the stylus holder, and then press up on the front edge of the stylus holder until it snaps into place
on the cartridge housing.
TRANSPORTING THE SYSTEM
IMPORTANT!
To protect the turntable from damage during transportation, a silver transit screw is located at the upper
right of the turntable platform.
1. Before playing, please use a screwdriver to turn the transit screw in clockwise direction (screw going
down) completely to unlock the turntable.
2. To lock the turntable again for transportation, please turn screw in counter-clockwise direction.
CARE OF THE CABINET
care of the cabinet is the same as any piece of furniture. When the cabinet is dusty, you may wipe it using
a soft, non-abrasive dust cloth. If the cabinet becomes smudged with fingerprints, you may use any good
quality commercial dusting and polishing spray cleaner. Do not spray any plastic or metal parts of this
system. We recommend spraying the cleaner on the cloth, not directly on the cabinet, to avoid any over
spray on any plastic or metal components.
All manuals and user guides at all-guides.com
CARE AND MAINTENANCE
- 13 -
Publicité
