Page 1
SIGNATURE MUSIC SYSTEM EANOS700 INSTRUCTION MANUAL Thank you for your purchase of this Electrohome product. Please read this instruction manual carefully before using product to ensure proper use. Keep this manual in a safe place for future reference. electrohome.com...
IMPORTANT SAFETY INSTRUCTIONS TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Page 3
IMPORTANT SAFETY INSTRUCTIONS • Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric heaters, on top of other stereo equipment that radiates too much heat, places lacking ventilation or dusty areas, places subject to constant vibration and/or humid or moist areas.
NEED HELP? DO NOT RETURN THIS PRODUCT TO THE STORE Please contact an ELECTROHOME® customer support representative Please contact us via one of the methods below: Online web chat: www.electrohome.com Support: www.electrohome.com/support For more product information visit www.ELECTROHOME.com...
TABLE OF CONTENTS WHAT’S INCLUDED ............................. 5 BUTTONS AND CONNECTIONS ..........................6 PREPARATION FOR USE ............................8 UNPACKING AND SETUP ................................8 POWER SOURCE ..................................8 BATTERY INSTALLATION OF REMOTE CONTROL ........................8 OPERATION ............................... 9 RAISING AND LOWERING THE LID IMPORTANT: ........................9 POWERING ON THE UNIT ................................9 AUX IN OPERATION ..................................9 INSERTING AND PLAYING A CD ..............................10...
BUTTONS AND CONNECTIONS MAIN UNIT CONTROL PANEL 1. Phonograph Lid 10. Remote Control Sensor 20. CD Drawer Lift to reveal turntable Holds the CD in the unit 11. Power Indicator 2. Phonograph Lid Support 21. Play/Pause Button 12. FM ST. Indicator Bracket Plays/Pauses playback Indicates FM stereo is ON...
Page 7
BUTTONS AND CONNECTIONS BACK OF UNIT REMOTE AUX IN TURNTABLE 28. Service Sticker 36. Speed Selector 45. Record Button (33/45/78 RPM) Access to adjusment screw Record from CD, Album or MP3 Select record play speed to USB 29. AUX IN Input 37.
PREPARATION FOR USE UNPACKING AND SETUP Transit Screw • Carefully remove the unit from the display carton and remove all packing material from the unit • Unwind the AC power cord and extend it to its full length • Unwind the FM Antenna wire and extend it to its full length •...
PREPARATION FOR USE RAISING AND LOWERING THE LID IMPORTANT: To open the lid, raise it as far as it will go until the lid support bracket ‘locks’ in the open position. To close the lid, lift it upward slightly until the lid support bracket ‘unlocks’ , and then gently lower the lid. TO AVOID DAMAGING THE CABINET OR THE LID, NEVER FORCE THE LID CLOSED.
OPERATION INSERTING AND PLAYING A CD Press the POWER button on the front panel to turn the system ON, set the volume to a low level. Press the CD/USB button. Press the OP/CL button to open the CD drawer. Place a CD in the tray, with the printed label facing up.
OPERATION REMOVING THE USB DRIVE Make sure to stop the playback and turn the unit off before removing the USB drive to avoid damage to the USB and the system. PLAYING IN MP3 MODE(UNDER CD/USB OPERATION) Press PLAY/PAUSE button to start or pause playback of the selected track in the CD/USB mode.
OPERATION LISTENING TO THE RADIO Press the POWER button on the front panel to turn the system ON, set the volume to a low level. Press the AM or FM button to select the band. The tuner backlighting will come on. Rotate the tuning control to select a station.
OPERATION PROGRAM RECORDING FROM A CD or MP3 DISC ONTO A USB DEVICE Perform steps 1 through 3 on page 10 to program the memory. Press the PLAY/ PAUSE button to start program playback. Select a track using the UP/F-F or DN/F-R buttons. Press the RECORD button twice to start recording; the USB icon will flash in the display.
CARE AND MAINTENANCE REPLACING THE STYLUS: IMPORTANT: Avoid touching the stylus itself. Lift the tone arm off the tone arm rest. At the front end of the tone arm, place the tip of your fingernail between the stylus holder and the cartridge housing as shown, press down on the stylus holder until it separates from the cartridge housing.
CARE AND MAINTENANCE TO REPLACE THE CARTRIDGE FROM TONE ARM PLEASE FOLLOW THE PROCEDURES BELOW: Gently lift the tone arm from the tone arm rest. By using your left hand to hold the tone arm and using your right hand to hold the rear portion of the cartridge.
CARE AND MAINTENANCE TONE ARM ADJUSTMENT The auto-return point of the tone arm has been preset by the factory, however, if the tone arm auto-returns before the end of the album please make the following adjustments. You will need a small Phillips screwdriver. Turn the adjustment screw clockwise ¼...
Next check the transit screw to ensure it was tightened. If the issue persists and operation is affected please visit www.electrohome.com/support and one of our Representatives will respond within 24 business hours.
ELECTROHOME® WARRANTY Thank you for choosing Electrohome. We guarantee your investment in our products is a solid one! Extensive thought, research, planning and design goes into every product we make. High quality components combined with precision manufacturing allows us to maintain the highest possible production standards. All items are guaranteed against defects in materials and craftsmanship.