Publicité
Les langues disponibles
Les langues disponibles
Mounting Bracket Installation
5
Use 4 pieces of PA5mm x 25mm screws (3) to attach the mounting brackets to the wall, making
sure they go into the plastic anchors, tighten them with the screwdriver.
Note: if the mounting surface is solid like wood, no need for plastic anchors.
WALL
6
Heater Installation
With the help of a partner, fasten the heater to the L-shaped bracket using the pre-installed wing
nuts on the back of the heater and hand tighten the wing nuts.
Note: if you are installing the heater on the ceiling, the heater must be mounted at a 45 degree
angle from the ceiling. DO NOT install the heater facing straight down.
PA5mm x 25mm Mounting Screw
Qty: 4 pcs
16
Publicité
