FUXTEC FX-E1LG2A Manuel D'instructions page 5

Follow all charging instructions and never charge the battery or battery tool outside the
temperature range specified in the operating instructions.
Incorrect charging or charging outside the approved temperature range can destroy the
battery and increase the risk of fire.
Charging the battery
- The battery must be charged before first use.
- Press the locking key (3) and remove the battery from the machine.
- Insert the battery pack in the charger.
- Connect the battery charger to the power supply. The charging status is indicated by the
control lamps (4).
- Insert the battery pack into the device and ensure that it clicks into place correctly.
Check the remaining capacity of the battery pack.
- Press the key (2). The remaining capacity of the battery is indicated by the control lamps(1).
DISPOSAL
WARNING!
Make used power tools unusable before disposal:
- mains-operated power tools by removing the connecting plug,
- battery operated power tools by removing the battery.
For EU countries only
Do not throw power tools in household waste! According to the European Directive 2012/19/EC
on waste electrical and electronic equipment and its implementation in national law, used
electrical equipment must be collected separately and sent for environmentally sound recycling.
Raw material recovery instead of waste disposal. Appliance, accessories and packaging should be
recycled in an environmentally friendly way. Plastic parts are marked for recycling
according to type.
WARNING!
Do not throw batteries in the household waste, fire or water. Do not open spent batteries.
Batteries should be collected, recycled or disposed of in an environmentally friendly way.
For EU countries only: According to Directive 2006/66/EC, defective or used batteries must be
recycled.
NOTE
Please contact your local authority/city for information on disposal options.