FUXTEC FX-E1LG2A Manuel D'instructions page 4

Original manual for FUXTEC 20V 2,4A charger
Intended Use
This charger is exclusively intended for charging batteries of the FUXTEC 20 Volt series. The
device is not intended for commercial use. Any other use or modification of the device is
considered improper use and involves considerable risk of accidents. The manufacturer
accepts no liability for damage resulting from improper use.
Use and handling of the battery tool
Only charge the batteries in chargers recommended by the manufacturer.
For a charger that is suitable for a particular type of battery poses a risk of fire when used
with other batteries.
Only use the rechargeable batteries provided for this purpose in battery tools. The use
from other batteries may cause injury and fire.
Keep the unused battery away from paper clips, coins, keys and nails, screws or other small
metal objects that can bridge the contacts of the could cause. A short circuit between the
battery contacts can cause burns or fire
The liquid may leak from the battery if used incorrectly. Avoid contact with it. In case of
accidental contact, rinse with water. If the liquid enters the eyes, you will need to seek
additional medical attention. Leaking battery fluid can cause skin irritation or burns.
Do not use a damaged or modified battery. Damaged or modified batteries may behave
unpredictably and cause fire, explosion or injury.
Do not expose a battery to fire or excessive temperatures. Fire or temperatures above
130°C/ 265°F may cause an explosion.