FlyTek ZIP Manuel D'exploitation Et D'entretien page 14

Remove the machine from the packaging and place it on a stable and horizontal surface, suitable to
support its weight, near a suitable socket. We recommend keeping the packaging and all its parts for
possible future transport.
Remove the steel cover to access the water tank (ref. G). WE RECOMMEND THE USE OF A WATER
SOFTENER FILTER OR ANTI-SCALE BAG that must be periodically replaced. If this is not done scale
deposits may form inside the machine, these can prejudice the correct operation of the machine, apart
from the validity of the warranty. After having inserted the water softener filter inside the tank, fill the latter
with drinking water, possibly with low calcium content. The tank can be filled using a funnel and a bottle.
The coffee pouring spout is located in the front part of the machine.
Turn on the machine pressing the green luminous switch located on the left side of the same machine; the
incorporated light turns on. As soon as the machine is turned on, the rapid heating process of the boiler starts.
Wait for the heating light (ref. C) to turn on, when this occurs it means that the water has reached the optimal
working temperature and the machine is ready to be used.
FILLING OF THE TANK
CONNECTION TO THE ELECTRIC NETWORK
The power voltage of the machine is not modifiable by the user. Before
connecting it to the electric network, check that the voltage of the network
corresponds to the power supply voltage of the machine indicated on the
identification plate.
COFFEE POURING SPOUT (ref. B)
During pouring do not touch the spouts and do not approach your face to the
hot parts of the machine (burns hazard). The heating surfaces of the machine
are subject to residue heat even after use!
INSTALLATION
TURNING-ON
D
C
14