Tylo Elite Mode D'emploi page 14

EN
Calender
Date and calendar
In order to be able to use the
Calendar functions for the Sauna
and Combi heaters, and also the
Tylarium installation, a door switch
is required, connected to the door
(Tylö part no. 90908035).
While setting the calendar function
you can create programs for
individual dates or programs that
repeat every week.
Configuration: System settings.
During Configuration there is both
information about the system and the
possibility to adapt and set various
functions and parameters. It is also
possible to configure additional
equipment (such as for example
fragrance pumps or extra lighting).
All manuals and user guides at all-guides.com
Day program
Overview program
When Configuration is touched, the screen shows a
menu with a number of separate sections. IN order to
see more rows, put your finger on the screen and draw
it up or down.
Only the Wifi menu is described in this quickstart
guide.
In order to be able to use Wifi for the sauna and Combi
installation, a door switch must be connected.
Bear in mind that the position where the control panel
is located affects how well it can communicate with
the wireless network. Many kinds of material disturb
the wifi signal. Test first with a smart phone where you
are thinking to locate the control panel, to ensure good
communication.
In order to connect to your local network, first activate
Wifi and press Network. Then press Scan which
searches for the accessible networks. In order to
connect, press on the desired network; if a password
is required press on Password, enter the password
and then press Connect. In order to connect mobile
applications or PC applications refer to the app
instructions on the Tylö web site (www.tylo.se/app).
Under Name you can name your system. A default name
is present to begin with, and this depends on the system
you have. In order to change or alter the name, press it
and a keyboard will appear for editing.
If you activate Auto connect the Elite Wifi will
automatically connect you to the selected network after
a power cut.
14