Publicité
Les langues disponibles
Les langues disponibles
2
OPERATIONAL SAFETY
READ BEFORE BEGINNING ASSEMBLY.
FAILURE TO UNDERSTAND AND FOLLOW ALL SAFETY RULES AND ASSEMBLY INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH.
METAL CONDUCTS ELECTRICITY:
Do not use this equipment where contact may be made with power lines or other live electrical circuits.
LOAD CAPACITY :
Maximum Bench load: 500 lb (227 kg)
Step-Up capacity: 250 lb (113 kg)
Bench-Top capacity: 500 lb (227 kg)
DO NOT OVERLOAD!
OPERATION AND SAFETY
1. Do not use this equipment if
you are in poor health, taking
medications, drugs, or have
been consuming alcohol, all of
which may impair your ability to
work safely on this product.
2. Always use this bench in
conformity with local or national
legislation which applies.
3. Always inspect before use. Do
not use this bench if damaged
or parts are missing or
excessive wear.
4. Acids are corrosive and can
seriously affect strength. Do not
expose this bench to corrosive
substances.
5. Examine thoroughly to make
sure unit is properly set up.
All manuals and user guides at all-guides.com
6. Before each use inspect all
nuts and bolts, making sure
they are all securely fastened.
Always tighten nuts no more
than 1/3 of a turn past the
contact point.
7. The top of the bench must be
level when in use. Do not use
the bench if the top is not level.
8. This bench must be used on a
firm surface that is free of pits,
debris, holes or obstructions.
9. Never place anything on the top
or under this bench to increase
height or to adjust to uneven
surfaces
10. Do not overreach. Always keep
body centered on the bench.
ALWAYS INSPECT
BEFORE USE
MOVE THE LOCKING
BRACES INTO
POSITION AND SNAP
IN PLACE
ACIDS ARE
CORROSIVE.
DO NOT EXPOSE
UNIT TO CORROSIVE
SUBSTANCES
11. Do not use if the surface is not
12. All legs must be adjusted to the
13. Never work close to open stairs,
14. Never hoist anything from the
15. Do not modify the bench or any
16. Always store in a dry location
MAX.
THIS BENCH IS
1
DESIGNED TO BE
USED BY ONE
PERSON ONLY
FINGER LEVERS
MUST BE LOCKED
DO NOT USE BENCH IF
DAMAGED OR PARTS
ARE MISSING.
All photos and drawings in this booklet are for reference purposes only.
firm and level.
same height.
doors, windows, floor openings
or other hazards.
bench.
of its components.
where the bench will not be
bent or damaged.
BENCH
MAX
MAXIMUM LOAD
CAPACITY: 500 LB
MAX. 500 lb
(227 KG)
(227 kg)
METAL CONDUCTS
ELECTRICTY
UNIT SHALL ONLY
BE USED ON
FIRM AND LEVEL
SURFACES
Publicité
