Publicité
Les langues disponibles
Les langues disponibles
Fax +32 2 359 95 50
The 3 micro wheels are a safety feature of the UV vacuum cleaner and are used to ensure
the UV bulb is not activated by the user by accident. CAUTION! Never touch or look
directly at the UV light when it is activated.
Cleaning your mattress
Keep the UV vacuum cleaner flat on the surface of the mattress and begin to move it smoothly
and steadily across your mattress.
Avoid leaving the UV vacuum cleaner in one area for more than 5 SECONDS as this may lead
to discolouration of your mattress due to the high intensity of the UV bulb.
Moving the UV vacuum cleaner slowly will ensure more dust mites, bed bugs, their waste and
bacteria are exposed to the UV-C rays and collected by the vacuum cleaner.
If using on a king-size mattress the telescopic handle will make it easier for you to reach the
full length of the mattress.
Cleaning other items
Use the same method for bed sheets and duvets. For smaller items, a back and forth motion
is recommended. The vacuum cleaner can be used on a variety of items around the home
such as carpets, rugs, matts, dog baskets and blankets.
EMPTYING THE DUST COLLECTOR
Dust box and filter
All manuals and user guides at all-guides.com
Copies of the I/B. Please reproduce them without any
changes
except
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
Before you remove the dust box or filter, please
ensure you switch off the appliance and unplug
the power cable.
To release, press the button located on the top of
the dust box then lift the dust box out.
To remove the filter, ensure the dust box is facing
downwards (this will stop the contents falling out).
Grip the filter with 2 fingers and pull.
It is recommended that you empty the contents
into an outside bin or sealed bin then brush the
filter to clear any debris.
(The filter can be hand washed in water. Leave to
dry completely before replacing back into the
dust box.)
DO NOT MACHINE WASH!
To reassemble, place the clean, dry filter back
into the dust box, then push the dust box back
into the unit until it clicks.
15
Assembly page 15/32
under
special
instruction
TKG HSS 1004 - 160728
from
Team
Publicité
