oneConcept 10030674 Mode D'emploi page 10

Insert the Rotary disc into the
middle flat side of food, then put
into the
bowl lid.
Important Hints on Use
• Install the blade cone (C,D,E) inside the bowl lid correctly (rotate clockwise in correct
position).
• Insert the rotary cone into the middle flat side of the food (which side is smooth).
• Plug in, place motor unit into rotary cone with food and put down into blade cone. Then
press the button. The unit is working normally.
• Release the button, the unit stop working.
• When change blade cone, take out the using blade cone by rotating anti-clockwise. Install
other blade cone by rotating clockwise.
• The unit has start/stop button, keep press the button for continuous working.
• In order to obtain best results, we recommend that you select unbent food.
Cleaning and Care
• Always unplug the appliance before cleaning the motor unit.
• Do not immerse the motor unit, do not place under water. Clean the motor unit using a
damp cloth. Dry it carefully.
• The bowl can be rinsed under water but must not be placed in the dishwasher
• Handle the blades with care as the blades are extremely sharp.
• If the plastic parts become stained by foods such as carrots, rub the affected areas with
a cloth soaked in vegetable oil and then clean as normal.
10
All manuals and user guides at all-guides.com
5
Put the motor unit and
rotary disc with food to-
gether, plug in, keep press
the button by hand for
continuous working.
6
Motor unit, rotary disc,
all of the blade cone can
be stored inside the bowl.
Put them into the bowl by
piling all blade cones (as
below)
Storage