Invisio G5 Mode D'emploi page 7

All manuals and user guides at all-guides.com
Charging the Charger without the G5
Before using the charger it needs to be charged. This can
be done by inserting the USB cable into the charger (USB
connector at the bottom of the charger). The LEDs will flash
for 0 sec.. You need to push the button to see whether the
charger is still charging or if it is fully charged. Fig. 8 illu-
strates if it is still charging and Fig. 9 illustrates if it is fully
charged.
Battery Level of the Charger
Push and hold the button and the lights will be turned ON
until the button is released. The number of lights indicates
the level of the battery as shown in Fig. 7.
Charging the G5 and the charger at the same time
The G5 and the charger can be charged at the same time.
Insert the G5 into the charger and plug-in the USB cable to
the charger. The LEDs indication is for 0 sec only.
You can push the button to check the status of the charging
for both the G5 and the charger. When the button is pres-
sed, the indicators will show for 0 seconds. Lights indica-
7