EnGenius X-TRA RANGE ESR300H Guide De Démarrage Rapide page 6

Prerequisites(without CD-ROM):
You will need a PC or a Laptop to complete the Router setup.

Ensure your current IP setting is configured as DHCP (obtain an IP address

automatically). You can refer to [Configure PC/Laptop Network Interface] section
on the user manual.
Plug in the power adapter and wait
until wireless LED is on.
Connect Modem and Router with an
Ethernet RJ45 cable (No. 1) as
shown.
Connect your PC/Laptop and the
router with an Ethernet cable
(No. 2) as shown.
Enter IP address 192.168.0.1 into
your web browser.
Now, you are about to enter the
Router setting page. You will be
prompted with the log-in page;
please enter the Username and
Password.
All manuals and user guides at all-guides.com
2
1
1
2