Publicité
All manuals and user guides at all-guides.com
USB3.0 Adapter for IDE / SATA Device
Adaptateur pour disque dur IDE / SATA périphérique
System Requirements
For 2.5" IDE drive:
1. Switch to "I" side
2. Plug the drive directly to the 44-pin connector on the adapter
(it is keyed, and will only fit one way).
3.5" IDE
HDD
SATA/IDE Switch
For SATA drive:
System Requirements
1. Switch to "S" side.
2. Connect the 15-pin SATA (flat) power plug to the SATA drive's power receptacle.
3. Connect the Serial-ATA data cable from the SATA drive to the receptacle on
the adapter.
3.5" SATA
HDD
3.5" SATA HDD
3.5" IDE
HDD
SATA/IDE Switch
SATA Cable
SATA Power
SATA Cable
SATA Power
2
RCAD-11003
User's manual
Publicité
