Publicité
USB3.0 Adapter for IDE / SATA Device
Adaptateur pour disque dur IDE / SATA périphérique
System Requirements
1
Hardware:
• A USB3.0 or 2.0 enabled PC or Mac
• Serial-ATA Hard Drive, 3.5" IDE or 2.5" IDE Drive
Software:
Windows 2000, XP, Vista, Windows 7 or Mac OS X
2
Package Contents
• The USB 3.0 to IDE or SATA Adapter
• AC Power Cord
• SATA Data Cable
• IDE Extension Cable (Male to Female)
• User Manual
3
Hardware Installation
Step 1
For 3.5" IDE drive:
1. Switch to "I" side.
2. Connect the 4-pin molex power plug to the drive's power receptacle.
3. Plug the drive directly to the 40-pin connector on the adapter
(it is keyed, and will only fit one way).
4 pin Molex Power Plug
3.5" IDE
HDD
All manuals and user guides at all-guides.com
SATA/IDE Switch
4 pin Molex Power Plug
1
User's manual
3.5" IDE HDD
RCAD-11003
Publicité
