JUST ONE HELMET J12 Mode D'emploi page 27

mAINTENANCE All manuals and user guides at all-guides.com
EN
MAINTENANCE
To clean the shell and front part use water and mild soap; let the helmet dry at room temperature, never expose it
to heat.
Cleaning the helmet with solvents, petrol by-products or chemical substances, the application of stickers or paint could
affect the structure of the shell, thus affecting the safety features, even if the damage is not readily visible.
Do not paint, or apply stickers, petrol or other chemical solvents to this helmet.
To clean the internal lining, just hand wash at 30°C maximum, exclusively using mild soap.
To clean the removable internal lining use a damp cloth and mild soap.
The fabric lining, even if it is part of removable elements, must not be soaked in water when it is applied to or
paired with an internal padding, either rigid or soft.
Dry the pieces at room temperature, away from sunlight and without exposing them to heat.
Periodically clean the «D-Ring» retention system with warm water and mild soap. Do not use solvents or chemical
detergents and do not lubricate.
Some colorings of the shell are made with Fluo paints that could be subject to the natural migration phenomenon with
a drop in intensity. The phenomenon could be enhanced when the helmet is exposed for long periods to a particularly
intense light. However, this does not affect the performances and the quality of JUST 1 Helmets.
JUST ONE s.r.l. therefore, cannot be held responsible if this should occur.
j U S T O N E H E L m E T S . C O m
22