Kallista P-21570 Guide D'installation page 8

Loop
Lift Rod
Assembly
5. Install the Lift Rod
NOTE: If more than one lift rod is supplied, choose the one that
most comfortably extends to the diagonal length between the closed
drain stopper to the overflow ell.
Assemble the lift rod components.
Place the spring of the lift rod assembly on the top of the closed
drain stopper and align the eye of the lift rod with the center of
the overflow ell opening.
Adjust the lift rod assembly to the proper length. Slide the
adjusting block up the adjusting rail to increase clearance, or
down the rail to decrease the clearance.
Center the eye of the lift rod with the center of the overflow ell
opening for final alignment.
1040186-2-A
All manuals and user guides at all-guides.com
Lift Rod
Lift rod
Eye
Adjusting
Rail
Adjusting
Block
Washer
Spring
Assemble lift rod
components.
8
Adjusting
Screw
Kallista