Publicité
Les langues disponibles
Les langues disponibles
Storage:
1) Carefully clean and dry the ultrasound humidifier, following the maintenance instructions.
2) Leave to dry completely before storing it away. Do not store away when there is water in the base.
3) Store the appliance in a cool dry place, out of reach of children.
PROBLEMS AND SOLUTIONS
If the appliance is not working correctly, under normal conditions, consult the following table:
PROBLEMS
No blast, no vapour
EN
Blast, but no vapour
Vapour with an unusual smell
Low intensity
No vapour is being emitted
Noise
HuMidifier
6
All manuals and user guides at all-guides.com
POSSIBLE CAUSES
No power
Vapour intensity control is at
minimum
Water level in the groove is too high
Water is leaking from the tank
No water in tank
Temperature of the unit is too low
Water has been in the tank too long
Intensity control is at minimum
Sediment on transducer
Water is too cold
Water is not clean
Intensity control is at minimum
Tank and base are not correctly linked Check that they are
Ventilator is not working correctly
Resonance due to level of water in the
tank being too low
Resonance due to an unstable surface Position unit on a stable surface
SOLUTIONS
Plug in appliance
Adjust vapour intensity
Remove water from the groove
Close cover correctly
Fill tank
Place unit in a room at room
temperature for half an hour before
use
Clean tank and fill with fresh water
Adjust control button
Clean transducer
Use water at room temperature
Clean tank and fill with fresh water
Adjust vapour intensity
Return appliance to supplier or after-
sales department
Add more water to the tank
Publicité
