Publicité
Les langues disponibles
Les langues disponibles
• Never touch the water or the immersed components when the unit is switched on.
• To prevent damage to components, do not splash the inside of the base unit.
• Do not scrape the transducer.
• In temperatures of below freezing (below 0°C), remove the water from the tank and the base to prevent the risk of
freezing.
• Do not use the humidifier if the air in the room is already humid enough (at least 50% relative humidity). Excessive
humidity is signalled by condensation on cold surfaces or cold walls in the room. To determine humidity of the room
correctly, use a hygrometer, available from most hardware and department stores.
• It is advisable to use the appliance at a temperature of between 5 and 40°C and in a relative humidity of below 50%.
COMPONANTS
1. Base unit
2. Main switch (ON/OFF and Vapour Setting)
3. Warning light
4. Tank
EN
5. Tank handle
6. Water level gauge
7. Transducer
8. Ventilator
9. Tank cap
10. Spray
11. Cover
12. Transformer
INSTRUCTIONS FOR USE
Features:
• 3.5l capacity
• Continuous operation for more than 15 hours at maximum vapour intensity.
• Easy-fill water tank.
• Integrated safety mechanism which automatically stops the diffuser from working when the water tank is empty.
• High-quality transducer guarantees correct and long-lasting operation.
Functions:
• Increases and regulates the relative humidity of the room
• Eliminates electrostatic charges
• Improves air quality
Directions for use:
• Position the appliance in the room half an hour prior to switching it on so that it is the same temperature as the room.
• Remove the water tank from the appliance (Fig. 2), unscrew the cap by turning it anticlockwise (Fig. 3).
• Fill the tank with clean water at a maximum temperature of 40°C (Fig. 4). Check that the silicone washer is correctly in
place and then close the cover by turning it clockwise.
HuMidifier
4
All manuals and user guides at all-guides.com
(Fig. 1)
12
8
9
11
5
4
10
7
6
1
3
2
Publicité
