NOTICE DE POSE / INSTALLATION INSTRUCTIONS
CS50016 -79270 ST-SYMPHORIEN
PRODUIT / PRODUCT
Pour un montage au sol / For floor mounting
COLORS 6 TUILES
COLORS 6 TILES
COLORS 8 TUILES
COLORS 8 TILES
COLORS 10 TUILES
COLORS 10 TILES
3 ///
INFORMATION IMPORTANTE / IMPORTANT INFORMATION
FR
A lire attentivement. Conserver ces informations pour un usage ultérieur.
AVERTISSEMENT
!
Malgré les précautions de protection, il peut y avoir un risque de
coupure au montage. Pour éviter cela, nous conseillons le port de
gants de sécurité EPI (Equipement de Protection Individuelle).
Les visseries de fixation ne sont pas incluses car leur choix dépend
du matériau du sol sur lequel est fixé le cache. Utilisez des visseries
de fixation adaptées au matériau du sol. Visserie de fixation à prévoir
M8 ou M6 minimum. Nous vous conseillons des visseries de fixation
traitées anti-corrosion. Pour obtenir des conseils sur les fixations à
utiliser, adressez-vous à un revendeur spécialisé.
Ne pas monter sur le produit. Ne rien poser dessus.
Prévoir une surface au sol solide et plane, de dimensions suffisantes
pour accueillir l'habillage de votre équipement.
(*) voir configurateur - dimensions minimales (largeur et profondeur en mm)
variables selon la taille et le modèle retenus.
Règlementation d'installation d'une pompe à chaleur
L'installation d'une pompe à chaleur ou d'une climatisation doit être
réalisée conformément aux recommandations du fabricant et dans
le respect des réglementations en vigueur dans le pays d'installation.
GB
Read carefully. Keep this information for future reference.
WARNING
!
Despite the protective precautions, there may be a risk of cuts during
assembly. To avoid this, we recommend wearing PPE (Personal
Protective Equipment) safety gloves.
Fixing screws are not included as their choice depends on the
material of the floor to which the cover is attached. Use fixing
screws suitable for floor in your home. Screwing elements (not
provided) : M8 or M6 minimum. We recommend fixing screws treated
anti-corrosion. For advice on which fixing devices to use, contact a
specialist dealer. Do not climb onto the product. Do not put anything
on it. Make sure to have a strong and levelled floor surface, of
correct dimensions
for installing the covering on your equipment.
(*)
(*) see configurator - minimum dimensions (width and depth in mm) linked to
the size and selected model.
Installation regulations for a heat pump
The installation of a heat pump or air conditioning should be carried
out in accordance with the manufacturer's recommendations and in
compliance with local codes and standards.
OUTILS / TOOLS
Vous munir de / Tools required - not provided :
Clé Allen de 4
4mm Allen key
Clé mixte de 10
10mm combination wrench
S15-2023 / DI001509
COLORS
(*)