Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY OF THE VERTICAL STABILIZER
www.modellmarkt24.ch
08
For the assembly of the tail-
plane, the fuselage and the
tailplane are needed.
09
Insert the tailplane into the fuselage and
position it.
Note: Gluing the tailplane to the fusela-
ge is not intended! However, this can be
done at your own discretion.
10
Connect the linkage to the
elevator control horn as
shown. Connect the attach-
ment clip to the outermost
hole of the control horn.
11
Ready assembled model wit-
hout armament and auxiliary
tanks.
Publicité
