Publicité
Rack Installation
The Soundweb Contrio Server must be installed according to the guidelines laid
out in this document. Damage caused to the Soundweb Contrio Server resulting
from a failure to follow these guidelines is not covered by the warranty. The
Soundweb Contrio Server MUST be installed using the provided rack rails.
To install the Soundweb Contrio Server into the rack:
1. Open the provided box containing the rack rail kit and locate the rack
installation instructions.
2. Follow steps 3 and 4 in the rack installation instructions (these are the steps
for tooled installation).When installing the screws in the front of the rack (in
step 4 of the rack installation instructions), install only the center screw and
omit the top screw for each rack rail as shown below.
Omit Top
Screw
3. Once the rails have been installed per the rack installation instructions, slide
the Soundweb Contrio Server into the rack rails through the front of the rack.
4. Install the 2 additionally supplied screws and washers into the upper holes in
the front of the rack (these are the holes where the screws were ommitted in
step 2 above).
All manuals and user guides at all-guides.com
3
Publicité
