Product Registration/Warranty
To register your product, please visit http://bssaudio.com/en-US/support/
warranty_registration.
For warranty information, please visit http://bssaudio.com/en-US/support/
warranty_policy.
Important User Information
Do not remove covers. No user serviceable parts inside, refer servicing to
qualified service personnel. For continued compliance with international EMC
regulations, it is important that all cables be screened, and connected as
follows:
Included Items
Introduction
This guide was written with the aim of guiding you through the installation of a
Soundweb Contrio Server. We recommend that you read this installation guide
before attempting to install and operate the server.
The Soundweb Contrio Server allows processor-intensive, non-audio processing
tasks to be offloaded from BSS Soundweb London devices on the network and
managed on a single, more capable, centralized HiQnet™ device. This frees up
processing power on the Soundweb London devices so they can focus on audio
processing tasks. The Soundweb Contrio Server also provides self-healing
capabilities and functions as a multi-channel media device with two models
available for audio transport, they are:
2
All manuals and user guides at all-guides.com
• Control cable screens to the ground screws adjacent to the connector.
• Network cables should be of type Cat 5, fitted with a clip-on ferrite sleeve
(STEWART TYPE 28A2029-0A0) near the network socket end.
• This equipment must be earthed. It should not be necessary to remove any
protective earth or signal cable shield connections to prevent ground loops.
Any such disconnections are outside the recommended practice of BSS
Audio, and will render the EMC or safety certificate void.
• Soundweb Contrio Server
• Rack Rail Installation Kit
• 4 Power Cables
• 2 Screws & Washers For Mounting Front-Panel To Rack Rails
• The BLU link Model: Offers up to 64 x 64 channels of BLU link audio
transport.
• The Dante Model: Offers up to 64 x 64 channels of Dante
audio transport.
®