Clarity EASY RECALL Manuel D'instructions page 8

Setting up Your
EASY RECALL
6. If using a telephone, connect
the telephone line cord into the
jack labeled PHONE on the
back of the Easy Recall and
into the phone jack of the tele-
phone.
Figure 6 - Connecting a telephone
7. When the Easy Recall is turned
on, it will announce,
machine is on.
Your Easy Recall answering
Note:
machine has a maximum capacity
of 24 messages or 14 minutes.
Each message has a maximum
time limit of two minutes.
5
All manuals and user guides at all-guides.com
(continued)
"
The
"
You can personalize the
following features:
• If you want to identify when
your messages were received,
you must program the date
and time into your Easy Recall
answering machine; to pro-
gram the date and time use the
included template, and follow
the directions in this manual.
• To personalize your outgoing
voice [or TTY] message, just
follow the easy recording
directions in this manual.
Your Easy Recall answering
Note:
machine has a maximum
capacity of 24 messages
or 14 minutes. Each
message has a maximum
time limit of two minutes.
Pre-programmed Outgoing
Messages
This unit has been pre-programmed
with the following features:
• A factory installed outgoing
voice message, "Please leave